Logo 中国

挂号 | 登录 

Logitech 罗技K830 Illuminated Living-Room 键盘 (USB, 无线, Touchpad)

输入/输出 键盘, 罗技 (Logitech), 无线

Logitech 罗技K830 Illuminated Living-Room 键盘 (USB, 无线, Touchpad)
Linux兼容: 只有Linux兼容的额定此页面上,而不是产品的总体质量。如果您使用本产品使用Linux,请率和分享您的经验,在此页(底部)的注释区域支持其他的Linux用户。
3 投票, 平均: 4.7 出最多 53 投票, 平均: 4.7 出最多 53 投票, 平均: 4.7 出最多 53 投票, 平均: 4.7 出最多 53 投票, 平均: 4.7 出最多 5
  ( 4.7 3 等级)

Logitech 罗技K830 Illuminated Living-Room 键盘 
Minimum: ¥ 490.15 
Maximum: ¥ 500.01  
更新: 02/02/2016 07:17


The Logitech K830 is an illuminated wireless keyboard with integrated touchpad. The keyboard was designed to be used in combination with HTPCs or smart TVs and has a small size and low weight: approximately 4.9 x 14.4 x 0.6 inches and 1.1 pound (i.e. 36.5 cm x 12.5 cm x 1.7 cm and 0.5 kg).

The keys have a very soft pressure point and make hardly any noise while typing. The battery is integrated into the keyboard and can not be removed. It is recharged via the USB socket on upper side of the K830. Furthermore, the keyboard is equipped with a brightness sensor, which activates the illumination of the keys if the ambient light reaches a certain threshold. The brightness is reduced again, if the room gets too dark. The three levels of brightness (high, medium, off) can be selected by one of the function keys. However, the illumination is not perfectly homogeneous. Some letters are brighter than others.

The keyboard is supported under Linux. The wireless connection is established by the Logitech Unifying Receiver, which is standard for most of Logitech’s wireless devices. It has the USB ID 046d:c52b

Bus 006 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver

and is automatically recognized by the kernel:

usb 6-2: new full-speed USB device number 3 using ohci_hcd
mtp-probe: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-2"
logitech-djreceiver 0003:046D:C52B.0009: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-2/input2
mtp-probe: bus: 6, device: 3 was not an MTP device
input: Logitech Unifying Device. Wireless PID:4032 as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.2/0003:046D:C52B.0009/input/input13
logitech-djdevice 0003:046D:C52B.000A: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4032] on usb-0000:00:13.1-2:1

and automatically recognized as input device by the X-Server:

Virtual core pointer                                    id=2	[master pointer  (3)]
  ↳ Virtual core XTEST pointer              	        id=4	[slave  pointer  (2)]
  ↳ Logitech USB Receiver                   	        id=9	[slave  pointer  (2)]
  ↳ Logitech Unifying Device. Wireless PID:4032	        id=10	[slave  pointer  (2)]

The touchpad has additionally two buttons at its bottom for left and right mouse click. Furthermore, the button at the left front side of the keyboard is used as left mouse click, which is very hand, if one is sitting on the couch and is holding the keyboard in its left hand while using the right one for moving the mouse pointer. Under Ubuntu 12.04, the two-finger click on the touchpad is automatically recognized as right mouse click and the vertical two-finger-swipe is used for up and down scrolling.

Function Keys

The keyboard is equipped with several function keys, most of them are located at the F1 to F12 keys. The function is used as standard, while th “FN” key needs to be pressed in order to activate a F key.

The following function keys are supported under Ubuntu 14.04:

  • F1 activates the the key illumination and,
  • F2, F3, and F6 open the dash,
  • F4 closes the active window,
  • F5 restarts the last used application,
  • F7 focuses the search bar in the web browser,
  • F8 goes to the home page of the web browser,
  • F10, F11, F12 can be used to control the media player like Rhythmbox (play/pause, previous track, next track),
  • Insert key, to switch between the windows,
  • Backspace, to make a screenshot
  • Delete key to hibernate the system
  • three separate keys to control the sound volume


Additional status info for keyboard (e.g., battery status) can be shown by the program Solaar. This program is not part of the Ubuntu distribution, however, it can be installed via Ubuntu’s package management system by adding its repository:

sudo add-apt-repository ppa:daniel.pavel/solaar
sudo apt-get update && sudo apt-get install solaar

Alternatively, on can download the source code of the program from it’s Git repository:

Solaar shows the power status of connected Logitech equipment in the menu:

and allows paring and unpairing between the Logitech Unifying Receiver and keyboard:


scroll left scroll right


请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。



使用下面的 HTML 标签和属性: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

允许的文件类型: txt, jpg, png, gif, 最大文件大小 : 2MB.