GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Logo 中国

挂号 | 登录 

EnerGenie EG-PMS2 (Programmable, 6x Multiple Socket, Overvoltage Protection, USB)

输入/输出 EnerGenie, 电源板, 电源, USB

EnerGenie EG-PMS2 (Programmable, 6x Multiple Socket, Overvoltage Protection, USB)
Linux兼容: 只有Linux兼容的额定此页面上,而不是产品的总体质量。如果您使用本产品使用Linux,请率和分享您的经验,在此页(底部)的注释区域支持其他的Linux用户。
2 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 5
  ( 5 2 等级)


价格走势
EnerGenie EG-PMS2 
-
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 13/08/2015 06:30

回顾Linux的兼容性

The EnerGenie EG-PMS2 is a multiple socket outlet with 6 programmable sockets. The sockets can be controlled via USB from a PC. The EG-PMS2 has the USB ID 04b4:fd13

Bus 001 Device 008: ID 04b4:fd13 Cypress Semiconductor Corp.

and is supported under Linux by the tool SIS-PM Control for Linux, which is also called “sispmctl” in short.

The necessary drivers can be installed under Debian or Ubuntu by apt-get:

apt-get install sispmctl

and allwos to power on and power off the separate sockets from a Linux-PC (or from a Raspberry Pi). This way, electrical consumer can be shut down or started per command line or script (e.g. per ssh network connection, openvpn connection or via cron job). Also OpenSuSE and Gentoo are supported by sispmctl.

All connected electrical consumers can be powered on with the following sispmctl command

sispmctl -o all

If only the first socket needs to be powered on, this can be done with

sispmctl -f 1

Additionally, the tool provides a web frontend, which can be started (e.g. on port 8989) by:

sudo sispmctl -i 0.0.0.0 -p 8989 -l

Afterwards, the web frontend can be accessed under port 8989 per http in a web browser.


类似Linux的硬件

scroll left scroll right

 评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 

电子邮件地址不会被公开。

率的Linux兼容性


使用下面的 HTML 标签和属性: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


允许的文件类型: txt, jpg, png, gif, 最大文件大小 : 2MB.