GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Logo 中国

挂号 | 登录 

LG BH16NS40 (internal Blu-ray Writer 16x, Serial ATA 1.1a)

数字视频光盘 / 光盘驱动器 Blu-ray, CD, DVD, 内部, LG, 刻录机

LG BH16NS40 (internal Blu-ray Writer 16x, Serial ATA 1.1a)
Linux兼容: 只有Linux兼容的额定此页面上,而不是产品的总体质量。如果您使用本产品使用Linux,请率和分享您的经验,在此页(底部)的注释区域支持其他的Linux用户。
5 投票, 平均: 4.4 出最多 55 投票, 平均: 4.4 出最多 55 投票, 平均: 4.4 出最多 55 投票, 平均: 4.4 出最多 55 投票, 平均: 4.4 出最多 5
  ( 4.4 5 等级)


价格走势
LG BH16NS40 
-
Minimum: ¥ 318.95 
Maximum: ¥ 619.00  
更新: 22/03/2016 10:08

回顾Linux的兼容性

The LG BH16NS40 is an internal Blu-ray writer

  • writing: 12x BD-R DL, 8x BD-RE(DL)
  • 16x DVD±R, 5x DVD-RAM, 8x DVD±R DL, 48x CD-R
  • reading: 12x BD, 16x DVD, 5x DVD-RAM, 48x CD, SATA

and is automatically supported under Linux (at least since Ubuntu 12.04).

Several Linux users reported that the writing process of the BH16NS40 was interrupted regurlarly. E.g., K3B shows the following error:

Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 96 C3 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.066s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 79042560 bytes
Writing  time:   54.639s
Average write speed  95.3x.
Min drive buffer fill was 99%
Fixating...
Fixating time:    0.000s
/usr/bin/wodim: fifo had 1436 puts and 1246 gets.
/usr/bin/wodim: fifo was 0 times empty and 1211 times full, min fill was 91%.

This problem can be solved by using the tool cdrecord instead wodim. To exchange the writing tool under Ubuntu the wiiter programs needs to be deinstalled:

sudo apt-get remove k3b
sudo apt-get remove brasero
sudo apt-get remove wodim

Afterwards, cdrecord can be installed and the writer programs can be re-installed:

sudo apt-get install cdrecord
sudo apt-get install k3b
sudo apt-get install brasero
sudo apt-get install k3b-i18n

The drive ca be identified by the following dmesg output:

ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH16NS40  1.00 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5

确定硬件配置 (9 结果)

这种硬件组件在以下系统配置下使用的Linux用户。这些结果通过收集我们的 扫描工具:
分配
内核版本
等级
扫描日期
Manjaro Linux 4.9.33-1-MANJARO - 22/06/2017
Debian GNU/Linux 9.0 (stretch) 4.10.13-towo.1-siduction-amd64 - 04/05/2017
Manjaro Linux 4.8.14-1-rt9-MANJARO - 29/12/2016
Debian GNU/Linux 8.3 (jessie) 3.16.0-4-amd64 - 23/12/2016
Debian GNU/Linux unstable (sid) 4.8.10-towo.1-siduction-amd64 - 26/11/2016
Ubuntu 16.04.1 LTS 4.4.0-38-generic - 21/09/2016
Ubuntu 16.04.1 LTS 4.4.0-36-generic - 30/08/2016
Ubuntu 16.04.1 LTS 4.4.0-34-generic - 21/08/2016
Ubuntu 16.04.1 LTS 4.4.0-31-generic - 30/07/2016

类似Linux的硬件

scroll left scroll right

 评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 

电子邮件地址不会被公开。

率的Linux兼容性


使用下面的 HTML 标签和属性: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


允许的文件类型: txt, jpg, png, gif, 最大文件大小 : 2MB.