Logo 中国

挂号 | 登录 

AVM FRITZ 卡 PCI V2.1 (Internal ISDN 卡)

VOIP网络电话 AVM, Fritz, ISDN, PCI

AVM FRITZ 卡 PCI V2.1 (Internal ISDN 卡)
Linux兼容: 只有Linux兼容的额定此页面上,而不是产品的总体质量。如果您使用本产品使用Linux,请率和分享您的经验,在此页(底部)的注释区域支持其他的Linux用户。
2 投票, 平均: 3.0 出最多 52 投票, 平均: 3.0 出最多 52 投票, 平均: 3.0 出最多 52 投票, 平均: 3.0 出最多 52 投票, 平均: 3.0 出最多 5
  ( 3 2 等级)

Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 29/07/2015 22:56


The AVM Fritz PCI card exists in two version, v2.0 and v2.1. Both versions can be used under Linux, however, the complexity of the installation and configuration can largely vary between different kinds of Linux distributions. Due to the large availability of ISDN connections in Germany the support of ISDN cards is generally very good and simple in SuSE Linux distributions. The AVM Fritz PCI Card is supported at least since SuSE 8 an can be configured completely by the SuSE configuration tool Yast.

Configuration of the card under Ubuntu is more complicated. First, the Linux kernel image needs to be installed

sudo apt-get install linux-image-386

Afterwards, a restart of the system is necessary before executing the upcoming steps. The following packages are necessary to access the AVM Fritz Card:

sudo apt-get install linux-restricted-modules-386 libcapi20-dev libcapi20-3 capiutils pppdcapiplugin drdsl avm-fritz-firmware

The configuration of the Ubuntu system needed to use the AVM Fritz card is described in detail at:!Card_DSL

AVM Fritz Karte PCI V2.1

The version V2.1 is identified in the following way by the Linux system:

    21: PCI 0f.0: 10300 ISDN Adapter
      [Created at pci.318]
      Unique ID: _+Pw.12345678901
      SysFS ID: /devices/pci0000:00/0000:00:0f.0
      SysFS BusID: 0000:00:0f.0
      Hardware Class: isdn adapter
      Model: "AVM FRITZ!Card PCI"
      Vendor: pci 0x1244 "AVM GmbH"
      Device: pci 0x0a00 "A1 ISDN [Fritz]"
      SubVendor: pci 0x1244 "AVM GmbH"
      SubDevice: pci 0x0a00 "FRITZ!Card ISDN Controller"
      Revision: 0x02
      Driver: "fcpci"
      Driver Modules: "avmfritz"
      Memory Range: 0xdffffee0-0xdffffeff (rw,non-prefetchable)
      I/O Ports: 0xc400-0xc41f (rw)
      IRQ: 5 (1045 events)
      Requires: capi4linux, i4l-base, i4l-isdnlog
      Module Alias: "pci:v00001244d00000A00sv00001244sd00000A00bc02sc80i00"
      Driver Info #0:
        I4L Type: 8002/1 [AVM FRITZ!Card PCI]
      Driver Info #1:
        I4L Type: 27/1 [AVM FRITZ!Card PCI]
      Config Status: cfg=no, avail=yes, need=no, active=unknown

Information regarding the version v2.0 ofthe card can be found at

确定硬件配置 (1 结果)

这种硬件组件在以下系统配置下使用的Linux用户。这些结果通过收集我们的 扫描工具:
Linux Mint 17.3 Rosa 4.2.0-35-generic - 22/04/2016


scroll left scroll right


请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。



使用下面的 HTML 标签和属性: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

允许的文件类型: txt, jpg, png, gif, 最大文件大小 : 2MB.