Logo 中国

挂号 | 登录 

Linksys WRT160NL (无线 Router, 无线, 300 Mbit)

802.11n, 思科 (Cisco), dd-wrt, Linksys, OpenWRT, 路由器, 无线网络, 无线

Linksys WRT160NL (无线 Router, 无线, 300 Mbit)
Linux兼容: 只有Linux兼容的额定此页面上,而不是产品的总体质量。如果您使用本产品使用Linux,请率和分享您的经验,在此页(底部)的注释区域支持其他的Linux用户。
2 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 52 投票, 平均: 5.0 出最多 5
  ( 5 2 等级)

Linksys WRT160NL 
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 13/08/2015 12:46


The Linksys WRT160NL WiFi router is equipped with a Linux based firmware by default. But, according to several users of the device, the standard firmware seems unstable.


Alternatively it is possible to install the OpenWrt firmware on the router. But only the version v6 of the router is supported and can be used together with the OpenWrt version “Backfire”. For the version v1 of the router a OpenWrt revision “Kamkaze” is available, but is still marked as “Work in Progess”.

If the correct hardware version (v6) is available, the installation of OpenWrt is quite simple. First, the “Backfire” version of the firmware has to be downloaded:

The firmware can be uploaded to the device with the web interface of the standard firmware. Afterwards, the OpenWrt Router can be reached at the address with a web browser.

It is also possible to connect additional devices to the WRT160NL, e.g. a webcam or an Arduino board. Such setups are described at

Further information how to use OpenWrt on the WRT160 can be found at


Also the dd-Wrt firmware can be used on the WRT160NL: dd-wrt on a WRT160NL.

Installation- and configuration hints for dd-wrt are given at
The pre-compiled firmware file is used in this case.


scroll left scroll right


请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。



使用下面的 HTML 标签和属性: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

允许的文件类型: txt, jpg, png, gif, 最大文件大小 : 2MB.