GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Logo 中国

挂号 | 登录 

TechniSat SkyStar USB 2 HD CI

多媒体 DVB-S, HD, TechniSat, USB

TechniSat SkyStar USB 2 HD CI
Linux兼容: 只有Linux兼容的额定此页面上,而不是产品的总体质量。如果您使用本产品使用Linux,请率和分享您的经验,在此页(底部)的注释区域支持其他的Linux用户。
2 投票, 平均: 2.0 出最多 52 投票, 平均: 2.0 出最多 52 投票, 平均: 2.0 出最多 52 投票, 平均: 2.0 出最多 52 投票, 平均: 2.0 出最多 5
  ( 2 2 等级)


价格走势
TechniSat SkyStar USB 2 HD CI
-
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 13/08/2015 10:23

回顾Linux的兼容性

The TechniSat SkyStar USB 2 HD CI is a USB DVB-S2 receiver with HD support but is only partly supported by Linux.

It is possible to use the receiver since Linux Kernel version 2.6.35.4 together with the Video4Linux driver from http://linuxtv.org/hg/v4l-dvb/. Nonetheless, the CI module is not supported with this module.

The USB receiver has the USB-ID 147f:0001 und is identified by the Kernel in the following way:

Bus 002 Device 005: ID 14f7:0001

The firmware file dvb-usb-az6027-03.fw is necessary for the module. It can be downloaded and installed in the following way:

wget http://linux.terratec.de/files/TERRATEC_S7/20110630_TERRATEC_S7r3_Linux.tar.gz
tar -xf 20110630_TERRATEC_S7r3_Linux.tar.gz
sudo cp 20110630_TERRATEC_S7r3_Linux/dvb-usb-az6027-03.fw /lib/firmware

With the firmware file the card gets initialized. If the firmware file is missing, the kernel reports the following error:

dvb-usb: found a 'Technisat SkyStar USB 2 HD CI' in cold state, will try to load a firmware
dvb-usb: did not find the firmware file. (dvb-usb-az6027-03.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
dvb_usb_az6027: probe of 1-5:1.0 failed with error -2
usbcore: registered new interface driver dvb_usb_az6027

If the driver has to be compiled by hand a detailed description can be found at: http://www.linuxtv.org/wiki/index.php/Technisat_SkyStar_USB_2_HD_CI


类似Linux的硬件

scroll left scroll right

 评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 

电子邮件地址不会被公开。

率的Linux兼容性


使用下面的 HTML 标签和属性: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


允许的文件类型: txt, jpg, png, gif, 最大文件大小 : 2MB.