GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Logo 中国

挂号 | 登录 

Canon Pixma MG5350 All-in-One printer

打印 复印 扫描 传真 打印 复印 扫描 传真, 教规 (Canon), Pixma, 打印机, 扫描仪, USB

Canon Pixma MG5350 All-in-One printer
Linux兼容: 只有Linux兼容的额定此页面上,而不是产品的总体质量。如果您使用本产品使用Linux,请率和分享您的经验,在此页(底部)的注释区域支持其他的Linux用户。
5 投票, 平均: 4.0 出最多 55 投票, 平均: 4.0 出最多 55 投票, 平均: 4.0 出最多 55 投票, 平均: 4.0 出最多 55 投票, 平均: 4.0 出最多 5
  ( 4 5 等级)


价格走势
Canon Pixma MG5350 All-in-One printer
-
Minimum: ¥ 0.00 
Maximum: ¥ 0.00  
更新: 16/08/2015 02:21

回顾Linux的兼容性

Printing and scanning with the Canon Pixma MG5350 All-in-One printer is fully supported by Linux with drivers provided by Canon. The All-in-One printer can be connected to the PC via USB or via WiFi. The USB ID of the device is 04a9:1754

Bus 001 Device 006: ID 04a9:1754 Canon, Inc.

After downloading the drivers they can be unpacked and the enclosed installation script has to be executed:

# cd cnijfilter-mg5300series-3.60-1-rpm
# ./install.sh
==================================================

Canon Inkjet Printer Driver
Version 3.60
Copyright CANON INC. 2001-2011
All Rights Reserved.

==================================================
Command executed = rpm -Uvh ./packages/cnijfilter-common-3.60-1.x86_64.rpm
Preparing...            	########################################### [100%]
   1:cnijfilter-common  	########################################### [100%]
Command executed = rpm -Uvh ./packages/cnijfilter-mg5300series-3.60-1.x86_64.rpm
error: Failed dependencies:
    	libtiff.so.3()(64bit) is needed by cnijfilter-mg5300series-3.60-1.x86_64
Command executed = rpm -e cnijfilter-common

For the scanner Canon provides the software Scangear:

# cd scangearmp-mg5300series-1.80-1-rpm
# ./install.sh
Passwort:
==================================================

ScanGear MP
Version 1.80
Copyright CANON INC. 2007-2011
All Rights Reserved.

==================================================
Command executed = rpm -Uvh ./packages/scangearmp-common-1.80-1.x86_64.rpm
Preparing...            	########################################### [100%]
   1:scangearmp-common  	########################################### [100%]
Command executed = rpm -Uvh ./packages/scangearmp-mg5300series-1.80-1.x86_64.rpm
Preparing...            	########################################### [100%]
   1:scangearmp-mg5300series########################################### [100%]
Installation has been completed.

For Debian based distributions the corresponding deb packages of the Pixma 5300 series is available at
http://support-sg.canon-asia.com/contents/SG/EN/0100395602.html and
http://support-sg.canon-asia.com/contents/SG/EN/0100395402.html.
For RPM based distributions the files can be found at:
http://support-au.canon.com.au/contents/AU/EN/0100395502.html (driver) and
http://support-au.canon.com.au/contents/AU/EN/0100395702.html (Scangear).

The program ScanGear is a software developed by Canon. The drivers used for this scan software are not compatible to Sane. Although the scanner is recognized by Sane via the sane backend (see http://www.sane-project.org/man/sane-pixma.5.html) support for the 5300 series is not yet fully tested.


类似Linux的硬件

scroll left scroll right

 评论

请使用注释部分提出更正的文章,以及相关的摘录 lspci -nnv, lsusb -v, lshw, dmesg ... 此外,使用一节的经验与此硬件组件或搜索该硬件的其他业主配置帮助交流。
 

电子邮件地址不会被公开。

率的Linux兼容性


使用下面的 HTML 标签和属性: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


允许的文件类型: txt, jpg, png, gif, 最大文件大小 : 2MB.