Logo India

Register | Login 

TP-Link TL-WDN3200 N600 Dual-band WiFi Adapter (2,4GHz, 300Mbps, USB 2.0)

Network 802.11n, TP-Link, USB, WiFi

TP-Link TL-WDN3200 N600 Dual-band WiFi Adapter (2,4GHz, 300Mbps, USB 2.0)
Linux compatibility: Only the Linux compatibility is rated on this page, not the general quality of the product. If you use this product with Linux, please rate it and share your experience in the comment area of this page (bottom) to support other Linux users.
6 votes, average: 3.0 out of 56 votes, average: 3.0 out of 56 votes, average: 3.0 out of 56 votes, average: 3.0 out of 56 votes, average: 3.0 out of 5
  ( 3 with 6 ratings)

Price trend
TP-Link TL-WDN3200 N600 Dual-band WiFi Adapter 
Minimum: ₹ 0.00 
Maximum: ₹ 1,214.00  
Updated: 16/03/2016 02:58

Review of Linux Compatibility

The TP-Link TL-WDN3200 is a USB WiFi stick with the USB ID 148f:5572:

Bus 001 Device 003: ID 148f:5572 Ralink Technology, Corp.

The stick bases on the Ralink 5572 chipset and is supported by Linux via the kernel module rt5572sta. Unfortunately, this module is not part of the standard kernel (see bug report) yet. Hence, the TL-WDN3200 is not automatically activated by the current distributions, e.g. Ubuntu 12.04.

A Linux driver is available at This driver has to be slightly edited before it can be compiled under Linux.

A already modified version of the driver can be found at and saves the hazzle of editing some files of the rt5572 driver.

After downloading the driver it has to be unpacked:

tar xvf DPO_RT5572_LinuxSTA_2.6.0.1_20120629.tar.bz2.bz2

compiled and installed

cd DPO_RT5572_LinuxSTA_2.6.0.1_20120629
sudo make
sudo make install

Identified Hardware Configurations (2 Results)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Scan Date
blackPanther OS v16.2SE (Silent Killer) 4.9.20-desktop-pae-1bP - 05/10/2017
blackPanther OS v16.2SE (Silent Killer) 4.7.0-desktop-1bP - 12/09/2017

Similar Linux Hardware

scroll left scroll right


4 Responses to “TP-Link TL-WDN3200 N600 Dual-band WiFi Adapter (2,4GHz, 300Mbps, USB 2.0)”

  • Otto says:

    Bom dia, funcionou muito bem, mas em 5.8 GHz nao esta funcionando. Alguem teve o mesmo problema ?

    Good morning, it worked fine, but 5.8 GHz is not working. Someone had the same problem?

    • LHG-Team says:

      Hello Otto,

      According to its specification the TL-WDN3200 should support frequencies between 5,745 to 5,825GHz. Maybe it is a issue of the driver.

      Could you please send the output of
      tail -f /var/log/syslog
      that appears if the stick is plugged in?

  • Luke Shiels says:

    Thanks for the edited drivers. They worked perfectly on a 512MB RAM Raspberry Pi running Raspberian installed via N.O.O.B.S.

    • mrjayviper says:

      Hi Luke. How did you install it via noobs? I asked because I looked at noobs here ( and I don’t think it can compile source code.

      I tried compiling it in my raspberry pi running raspbian and I got a compile error. thanks

Start new Discussion

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.

Email address will not be published.

Rate Linux compatibility

Use the following HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Allowed file types: txt, jpg, png, gif, maximum file size: 2MB.