GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Logo France

S’inscrire | Connexion 

3DConnexion SpaceNavigator (3D Souris, USB)

Entrée / Sortie 3D, 3DConnexion, IO, Souris, USB

3DConnexion SpaceNavigator (3D Souris, USB)
Examen de compatibilité avec Linux: Seule la compatibilité Linux est évalué sur cette page, pas la qualité générale du produit. Si vous utilisez ce produit avec Linux, s'il vous plaît noter et partager votre expérience dans la zone commentaire de cette page (en bas) pour soutenir d'autres utilisateurs de Linux.
2 évaluations, en myoenne: 4,0 de 52 évaluations, en myoenne: 4,0 de 52 évaluations, en myoenne: 4,0 de 52 évaluations, en myoenne: 4,0 de 52 évaluations, en myoenne: 4,0 de 5
  ( 4 avec 2 évaluations)

Prix: EUR 140,89 (En stock)
(sans frais de ports) Les prix d'Amazon.fr ne contiennent pas de frais de ports, mais cela peut dépendre du produit et du vendeur d'Amazon Marketplace.

 Achetez sur Amazon.fr


courbe de prix
3DConnexion SpaceNavigator 
-
Minimum: EUR 87,00 
Maximum: EUR 133,20  
Mis à jour: 02/11/2016 22:53

Examen de compatibilité avec Linux

The SpaceNaviagator from 3DConnexion is a 3D mouse that is also supported by Linux. The mouse has the USB ID 046d:c626 (some variants have alsu the USB ID 046d:c628),

Bus 003 Device 002: ID 046d:c626 Logitech, Inc. 3Dconnexion Space Navigator 3D Mouse

and is automatically supported under Linux by the kernel, i.e., with latest Linux kernel versions there is no need to install the Linux driver which is provided by 3DConnexion (see below).

If the 3D mouse is plugged in the device will be recognized automatically:

usb 1-3.4: new low speed USB device using ehci_hcd and address 7
usb 1-3.4: New USB device found, idVendor=046d, idProduct=c626
usb 1-3.4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-3.4: Product: SpaceNavigator
usb 1-3.4: Manufacturer: 3Dconnexion
input: 3Dconnexion SpaceNavigator as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input12
generic-usb 0003:046D:C626.0005: input,hidraw3: USB HID v1.10 Multi-Axis Controller [3Dconnexion SpaceNavigator] on
usb-0000:00:1d.1-1/input0

and the kernel will create the device pseudo-files /dev/input/eventN. These files can be used to read out the SpaceNavigator. The numbering of the files can vary depending on the hardware which is connected to the Linux system. Therefore, it is recommended to create udev rules which create device files with the same name at each system boot, e.g. /dev/input/spacenavigator.

To achieve this, the fie file « /etc/udev/rules.d/90-spacenavigator.rules » has to be created (as root) and needs the following contents:

KERNEL=="event[0-9]*", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c62[68]", MODE="0664", GROUP="plugdev", SYMLINK+="input/spacenavigator"

From now on the 3D mouse can always be read out via the file /dev/input/spacenavigator. Some distributions already include such a rule and automatically create the file

/dev/input/by-id/usb-3Dconnexion_SpaceNavigator-event-if00

or (e.g. Fedora fc13)

/dev/input/by-id/usb-3Dconnexion_SpaceNavigator-event-joystick

for the 3d mouse.

As mouse replacement

The SpaceNavigator can be used like a standard mouse. The configuration file of the X-Servers /etc/X11/xorg.conf has to be adapted in order to achieve this. In the section « ServerLayout » the SpaceNavigator has to be added as additional pointer device by adding the following lines:

  InputDevice "spacenav" "CorePointer"

Furthermore, the section « InputDevice » has to be created, similar to the existing ones for keyboard and standard mouse:

Section "InputDevice"
	Identifier 	"spacenav"
	Driver		"evdev"
	Option "Device" "/dev/input/spacenavigator"
	Option "Name" "3Dconnexion SpaceNavigator"
	Option "Pass" "3"
	Option "ZRelativeAxisButtons" "Off"
	Option "Mode" "Relative"
	Option "ConstantDeceleration" "15"
EndSection

After a restart of the X-Servers the Space Navigator can be used to control the mouse pointer.

Google Earth

The SpaceNavigator can also be used to controlthe 3d view of Google Earth. A detailed configuration description can be found at http://code.google.com/p/liquid-galaxy/wiki/LinuxSpaceNavigator.

Original driver

A installation of the original driver provided by 3DConnexion is not necessary for latest distributions. Instead, the SpaceNavigator can be read out directly by the device file. Older distributions might need an installation of the 3DConnexion drivers. After downloading the driver package and unpacking it

tar xzvf path/to/3dxware-linux-v1-4-3.x86_64.tar.gz

the installation program can be executed

./install-3dxunix.sh

Afterwards, the access rights for the configuration files have to be fixed:

sudo chmod go+rx /etc/3DxWare
sudo chmod go+r /etc/3DxWare/*.scg

The successful installation of the driver can be tested by the included demo program:

sudo /etc/3DxWare/daemon/3dxsrv -d usb

Matériel Linux Similaire

scroll left scroll right

 Commentaires

Utilisez la section commentaires pour nous suggérer des corrections de l'article et des sorties de commandes lspci -vnn, lsusb, lshw, dmesg, etc...
De plus, vous pouvez utiliser les commentaires pour nous communiquer vos expériences avec le matériel ou pour rechercher de l'aide pour la configuration.
 

L'adresse email n'est pas rendue publique.

Notez la compatibilité avec Linux


Tags HTML et attributes disponible : <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Types de fichiers autorisés : txt, jpg, png, gif, taille maximale de fichiers : 2MB.