GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Logo Canada

Register | Login 

TerraTec H7 (DVB-C, DVB-T, CI-Slot, USB)

Multimedia DVB-C, DVB-T, TerraTec, USB

TerraTec H7 (DVB-C, DVB-T, CI-Slot, USB)
Linux compatibility: Only the Linux compatibility is rated on this page, not the general quality of the product. If you use this product with Linux, please rate it and share your experience in the comment area of this page (bottom) to support other Linux users.
3 votes, average: 3.0 out of 53 votes, average: 3.0 out of 53 votes, average: 3.0 out of 53 votes, average: 3.0 out of 53 votes, average: 3.0 out of 5
  ( 3 with 3 ratings)


Review of Linux Compatibility

The TerraTec H7 provides DVB-C and CVB-T via USB port. The box has the USB-ID 0ccd:10a3

Bus 001 Device 003: ID 0ccd:10a3 TerraTec Electronic GmbH

and is supported by Linux since at least Linux kernel version 3.6.8 (please pay attention that this kernel version normally is not part of the current Linux distributions yet). In addition to the demodulator for DVB-T and DVB-S although the CI-Slot can be used with Linux.

For operation the TerraTec H7 needs the three kernel modules mt2063, drxk, and dvb_usb_az6007, which are included in kernel 3.6.8.

The card also needs firmware files that can be download from
http://linuxtv.org/downloads/firmware/dvb-usb-terratec-h7-drxk.fw and
http://linuxtv.org/downloads/firmware/dvb-usb-terratec-h7-az6007.fw if not already included in the used distribution.

The initialisation of the USB box is reported by the kernel in the following way:

usbcore: registered new interface driver dvb_usb_az6007
usb 2-1: dvb_usb_v2: found a 'Terratec H7' in cold state
usb 2-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-terratec-h7-az6007.fw'
usb 2-1: dvb_usb_v2: found a 'Terratec H7' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Terratec H7)
usb 2-1: dvb_usb_v2: MAC address: 11:22:33:44:55:66
drxk: frontend initialized.
usb 2-1: DVB: registering adapter 0 frontend 0 (DRXK)...
mt2063_attach: Attaching MT2063
Registered IR keymap rc-nec-terratec-cinergy-xs
input: Terratec H7 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/rc/rc0/input13
rc0: Terratec H7 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/rc/rc0
usb 2-1: dvb_usb_v2: schedule remote query interval to 400 msecs
usb 2-1: dvb_usb_v2: 'Terratec H7' successfully initialized and connected

Similar Linux Hardware

scroll left scroll right

 Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 

Email address will not be published.

Rate Linux compatibility


Use the following HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Allowed file types: txt, jpg, png, gif, maximum file size: 2MB.