Logo Canada

Register | Login 

LogiLink Fast Ethernet Printserver Parallel Port (PS0001)

Printer Network, Printer, Printserver

LogiLink Fast Ethernet Printserver Parallel Port (PS0001)
Linux compatibility: Only the Linux compatibility is rated on this page, not the general quality of the product. If you use this product with Linux, please rate it and share your experience in the comment area of this page (bottom) to support other Linux users.
6 votes, average: 4.7 out of 56 votes, average: 4.7 out of 56 votes, average: 4.7 out of 56 votes, average: 4.7 out of 56 votes, average: 4.7 out of 5
  ( 4.7 with 6 ratings)

Review of Linux Compatibility

The LogiLink Printserver PS0001 can be used to connect (older) printers with parallel port interface (Centronics socket) to the network in a low priced manner. The print server has 512 kb flash and 2 MB SD RAM and is configured per netzwork (HTTP).

The print server has a Centronics 36 pin plug (male) to connect the device directly on the printer and is equipped with a RJ45 socket as interface to the netzwork (10/100 MBit).

The following protocols are supported: LPR, IPP, RAW printing, Unix Logical Printing, Apple Talk, NetWare, SMB/TCP, NetBeui. Thanks to the LPR protocol the print server can be used by Linux. The IP adress of the device can be configured by DHCP.

Similar Linux Hardware

scroll left scroll right


Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.

Email address will not be published.

Rate Linux compatibility

Use the following HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Allowed file types: txt, jpg, png, gif, maximum file size: 2MB.