GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Register | Login 

HP LaserJet 100 MFP m175a (USB, All-In-One, Laser Printer, Scanner, Copier)

All-in-One Printer All-in-One Printer, Color Laser Printer, Copier, HP, Laser, Laser Printer, Laserjet, Scanner, USB

HP LaserJet 100 MFP m175a (USB, All-In-One, Laser Printer, Scanner, Copier)
Linux compatibility: Only the Linux compatibility is rated on this page, not the general quality of the product. If you use this product with Linux, please rate it and share your experience in the comment area of this page (bottom) to support other Linux users.
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)


Review of Linux Compatibility

The HP LaserJet 100 MFP m175a is an all-in-one device with laser printer and scanner. The device is connected via USB and has the USB ID
Bus 003 Device 005: ID 03f0:062a Hewlett-Packard 
The HP LaserJet 100 MFP m175a is fully supported under Linux thanks to the HPLIP drivers provided by HP. At least the version 3.11.7 of the HPLIP drivers is necessary in order to fully support the HP LaserJet 100 MFP m175a. Under Ubuntu the needed drivers can be installed via the apt-get package manager:
sudo apt-get install hplip hpijs hplip-gui
Otherwise, the drivers can be downloaded from HPLIP web site. The downloaded files (eventually after unpacking them) can be installed (as root):
sh hplip-3.11.7.run
Under Ubuntu this step is not necessary (because installation is done by the package management system) and one can immediately skip to the configuration step:
sudo hp-setup

Scanner:

The scanner can be used together with XSane, which can be installed under Ubuntu by:
sudo apt-get install xsane
If the scanner is found, one can also scan with the console program
hp-scan
After placing a sheet of paper on the scan unit and presses the scan button on the printer, a file “hpscan001.png” is created in the home directory.

The HP LaserJet 100 is recognized in the following way by the Linux kernel:

usb 3-10: new high-speed USB device number 5 using xhci_hcd
usb 3-10: New USB device found, idVendor=03f0, idProduct=062a
usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-10: Product: HP LaserJet 100 colorMFP M175a
usb 3-10: Manufacturer: Hewlett-Packard
usb 3-10: SerialNumber: 00CND8xxxxxx

Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Ubuntu 16.04.1 LTS 4.4.0-28-generic The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5 04/08/2016

Similar Linux Hardware

scroll left scroll right

 Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 

Email address will not be published.

Rate Linux compatibility


Use the following HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Allowed file types: txt, jpg, png, gif, maximum file size: 2MB.