GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Register | Login 

D-Link DWA-110 (WiFi, Wireless G Adapter USB)

Network Adapter, D-Link, USB, WiFi

D-Link DWA-110 (WiFi, Wireless G Adapter USB)
Linux compatibility: Only the Linux compatibility is rated on this page, not the general quality of the product. If you use this product with Linux, please rate it and share your experience in the comment area of this page (bottom) to support other Linux users.
1 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 51 vote, average: 5.0 out of 5
  ( 5 with 1 rating)


Price trend
D-Link DWA-110 
-
Minimum: $ 14.99 
Maximum: $ 15.00  
Updated: 11/11/2016 00:06

Review of Linux Compatibility

The D-Link DWA-110 is a USB wireless adapter which exists in two versions.

Revision A1 – USB ID 07d1:3c07

The revision A1 of the stick uses a Ralink RT2571W chipset and has the USB ID 07d1:3c07

Bus 003 Device 004: ID 07d1:3c07 D-Link System DWA-110 Wireless G Adapter(rev.A1) [Ralink RT2571W]

The WiFi stick is automatically recognized and fully supported by the Linux kernel since kernel v2.6.24 by the rt73usb driver:

usb 3-6: new high-speed USB device number 4 using ehci-pci
usb 3-6: New USB device found, idVendor=07d1, idProduct=3c07
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-6: Product: 802.11 bg WLAN
usb 3-6: Manufacturer: Ralink
usb 3-6: reset high-speed USB device number 4 using ehci-pci
ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt73usb
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
rt73usb 3-6:1.0: firmware: direct-loading firmware rt73.bin
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:11:22:33:44:55
wlan0: send auth to 00:11:22:33:44:55 (try 1/3)
wlan0: authenticated

Revision B – USB ID 07d1:3c0b

The revision B of the stick uses also uses a Ralink RT2870 chipset but has the USB ID 07d1:3c0b.
This version of the stick is supported by the Linux kernel since version 2.6.31.


Identified Hardware Configurations (1 Result)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
LMDE 2 Betsy 3.16.0-4-amd64 The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5The user provided the following rating for this hardware: 5 out of 5 12/07/2016

Similar Linux Hardware

scroll left scroll right

 Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 

Email address will not be published.

Rate Linux compatibility


Use the following HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Allowed file types: txt, jpg, png, gif, maximum file size: 2MB.