Seagate ST1000DX001 (SSHD, 1TB, 3.5 Inch, SATA)
Review of Linux Compatibility
The Seagate ST1000DX001 is a Solid State Hybrid Drive (SSHD). It can show I/O or file system errors during the boot sequence.
This problem can be solved by deactivating the Native Command Queuing (NCQ) via the following kernel parameter:
The “1” has to replaced by the SATA channel number to which the ST1000DX001 was connected.
Although the drive itself and the controller support NCQ, the SSD part of the drive does not need this software based driver because caching and copying of often used files is already supported by the firmware of the ST1000DX001.
(Source: Hacktor via Diaspora)
creation date: 21/07/2016, last update: 11/12/2016 , submitted by CptPike
Similar Linux Hardware
White Label (Hard Drive, 320GB, 8MB Cache, 7200RPM, SATA, 3.0Gb/s, 3.5 Inch)
Samsung HD250HJ (Hard Drive, 250GB, SATA, 3.5 Inch)
Transcend TS2TSJ25M3 (Hard Drive, 2 TB, USB 3.0, External, Military Drop Tested)
Intel 520 Series SSDSC2CW120A3 (SSD, 120GB, SATA, 2.5 Inch, 6 GB/s)
Intel SSDSA1M160G2LE (SSD, 160GB, SATA)
Transcend TS128GMTS400 (SSD, 128GB, SATA)
SanDisk SDSSDP06 (SSD, 2.5 Inch, SATA)
Seagate ST1000LM024 HN (Harddisk, 1TB, 8 MB Cache, 5400 RPM, SATA)
Intel SSDSCIHF120A4H (SSD, 120 GB, SATA, M.2)
SanDisk SDSSDA-120G-G25 (SSD, 120 GB, 2.5 Inch)
Kingston SH103S3240G (SSD, 240 GB, 2.5 Inch, SATA)
Transcend JetFlash (Flash Drive, 32GB, USB 3.1)
Pioneer BDR-209D (Blu-Ray Writer, Internal, SATA)
LG GTA0N (DVD, Writer, SATA)
LG BH16NS40 (internal Blu-ray Writer 16x, Serial ATA 1.1a)
Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg
Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.