GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Register | Login 

RCWARE RX2SIM (Game Controller, Remote Control)

I/O RCWare, Remote Control, USB

RCWARE RX2SIM (Game Controller, Remote Control)
Linux compatibility: Only the Linux compatibility is rated on this page, not the general quality of the product. If you use this product with Linux, please rate it and share your experience in the comment area of this page (bottom) to support other Linux users.
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)

Category:

Review of Linux Compatibility

The RCWARE RX2SIM (see RCWARE homepage) is a USB receiver for remote controls and allows to use all types of remote controls as input device, e.g. for flight simulators.
It provides 3 possible connection modes: USB, 3.5mm stereo jack, or external receiver (e.g. external 6-channel RC receiver from Spektrum, see photo).

The receiver has the USB ID 0483:a0eb

Bus 003 Device 008: ID 0483:a0eb STMicroelectronics

and is automatically recognized by the kernel as an Human Interface Device:

usb 3-3.3: new full-speed USB device number 8 using xhci_hcd
usb 3-3.3: New USB device found, idVendor=0483, idProduct=a0eb
usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.3: Product: RX2SIM Game Controller
usb 3-3.3: Manufacturer: RCWARE
usb 3-3.3: SerialNumber: 8Dxxxxxxxx
usb 3-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: RCWARE RX2SIM Game Controller as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.0/0003:0483:A0EB.0004/input/input8
hid-generic 0003:0483:A0EB.0004: input,hidraw3: USB HID v1.01 Joystick [RCWARE RX2SIM Game Controller] on usb-0000:00:14.0-3.3/input0

It can therefore be used under Linux as game controller without further driver configuration.

The RCWARE RX2SIM receiver can be used with Linux R/C flight simulators like CRRCSIM. Under Ubuntu, this simulator can be installed by

sudo apt-get install crrcsim

It was also successfully used under Linux with the R/C helicopter flight simulator Heli-X.


Identified Hardware Configurations (3 Results)

This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
Distribution
Kernel
Rating
Scan Date
Ubuntu 16.04.1 LTS 4.4.0-38-generic - 20/09/2016
Ubuntu 15.04 3.19.0-15-generic - 26/04/2015
Ubuntu 14.10 3.16.0-34-generic - 03/04/2015

Similar Linux Hardware

scroll left scroll right

 Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 

Email address will not be published.

Rate Linux compatibility


Use the following HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Allowed file types: txt, jpg, png, gif, maximum file size: 2MB.