Register | Login 

Pioneer BDR-206DBK (12x Blu-ray Writer, SATA)

DVD / CD / HD Blu-ray, internal, Pioneer, SATA, Writer

Pioneer BDR-206DBK (12x Blu-ray Writer, SATA)
Linux compatibility:Only the Linux compatibility is rated on this page, not the general quality of the product. If you use this product with Linux, please rate it and share your experience in the comment area of this page (bottom) to support other Linux users.
1 vote, average: 5.00 out of 51 vote, average: 5.00 out of 51 vote, average: 5.00 out of 51 vote, average: 5.00 out of 51 vote, average: 5.00 out of 5
  ( 5 with 1 rating)

Price: $ 135.99 (on stock)
(without shipping costs)Prices provided by Amazon do not include shipping costs that might be due depending on product and Amazon Marketplace supplier.

 Buy from Amazon.com

Price trend
Pioneer BDR-206DBK 
-
Minimum: $ 78.00 
Maximum: $ 135.99  
Updated: 28/07/2014 18:45

Review of Linux Compatibility

The Pioneer BDR-206DBK is an internal Blu-Ray writer, which is connected via SATA. The writer is automatically recognized under Linux and can be used with tools like cdrecord

scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.01a16 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2013 Joerg Schilling
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'BD-RW   BDR-206D'
Revision       : '1.05'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: BD-R sequential recording
Profile: BD-RE
Profile: BD-R random recording
Profile: BD-R sequential recording (current)
Profile: BD-ROM
Profile: DVD+R/DL
Profile: DVD+RW
Profile: DVD+R
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-RW sequential recording
Profile: DVD-R sequential recording
Profile: Removable Disk
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
Driver flags   : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1703936 = 1664 KB
FIFO size      : 4194304 = 4096 KB

Similar Linux Hardware

 Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 

Email address will not be published.

Rate Linux compatibility


Use the following HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Designed by elogi