GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Register | Login 

Intel EXPI9402PT PRO/1000 (PCIe, Dual Port, Gigabit Ethernet)

Ethernet Ethernet, Gigabit, Intel, Network card, PCI-Express

Intel EXPI9402PT PRO/1000 (PCIe, Dual Port, Gigabit Ethernet)
Linux compatibility: Only the Linux compatibility is rated on this page, not the general quality of the product. If you use this product with Linux, please rate it and share your experience in the comment area of this page (bottom) to support other Linux users.
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)

Price: $ 35.00 (on stock)
(without shipping costs) Prices provided by Amazon do not include shipping costs that might be due depending on product and Amazon Marketplace supplier.

 Buy from Amazon.com


Price trend
Intel EXPI9402PT PRO/1000 
-
Minimum: $ 29.00 
Maximum: $ 80.01  
Updated: 11/04/2016 13:06

Review of Linux Compatibility

The Intel EXPI9402PT PRO/1000 is a PCI-Express card with two Gigabit Ethernet ports. The card bases on the 82571EB chipset and is fully supported under Linux by the kernel module e1000e (e.g. since Ubuntu 8.04).

The card is shown by lspci with the following output:

01:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
01:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)

and the kenrel module e10001 is loaded automatically during the system startup:

e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI
e1000e: Copyright(c) 1999 - 2010 Intel Corporation.
e1000e 0000:02:00.0: Disabling ASPM  L1
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:02:00.0: setting latency timer to 64
e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
e1000e 0000:02:00.0: Disabling ASPM L0s
e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:11:22:33:44:55
e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003
e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX
e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Similar Linux Hardware

scroll left scroll right

 Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 

Email address will not be published.

Rate Linux compatibility


Use the following HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Allowed file types: txt, jpg, png, gif, maximum file size: 2MB.