GermanyUSACanadaUKFranceEspanaItaliaNederlandsIndiaJapanChina
Register | Login 

Digitus DS-30103 (PCIe, PATA, SATA II, 2x SATA, 300 MBit)

I/O Digitus, IO, PATA, PCIe, SATA

Digitus DS-30103 (PCIe, PATA, SATA II, 2x SATA, 300 MBit)
Linux compatibility: Only the Linux compatibility is rated on this page, not the general quality of the product. If you use this product with Linux, please rate it and share your experience in the comment area of this page (bottom) to support other Linux users.
2 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 52 votes, average: 5.0 out of 5
  ( 5 with 2 ratings)

Category:

Review of Linux Compatibility

The Digitus DS_30103 is a PCI-Express card with 4 ATA connectors (2 internal and 2 external ATA connectors) and one IDE connector. However, only the 2 internal or the two external ATA connectors can be used, not all 4 in parallel. A jumper has to be set to activate the wanted connectors.

The card is automatically recognized under Linux:

02:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 10) (prog-if 01 [AHCI 1.0])
        Subsystem: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller
        Flags: bus master, fast devsel, latency 0, IRQ 31
        Memory at fbc10000 (32-bit, non-prefetchable) [size=512]
        Expansion ROM at fbc00000 [disabled] [size=64K]
        Capabilities: [8c] Power Management version 3
        Capabilities: [50] Express Legacy Endpoint, MSI 00
        Capabilities: [94] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Kernel driver in use: ahci
        Kernel modules: ahci

02:00.1 IDE interface: JMicron Technology Corp. JMB368 IDE controller (rev 10) (prog-if 85 [Master SecO PriO])
        Subsystem: JMicron Technology Corp. Device 1368
        Flags: bus master, fast devsel, latency 0, IRQ 18
        I/O ports at e040 [size=8]
        I/O ports at e030 [size=4]
        I/O ports at e020 [size=8]
        I/O ports at e010 [size=4]
        I/O ports at e000 [size=16]
        Capabilities: [8c] Power Management version 3
        Capabilities: [50] Express Legacy Endpoint, MSI 00
        Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit+
        Kernel driver in use: pata_jmicron
        Kernel modules: ata_generic, pata_acpi, pata_jmicron

and gets also initialized:

dracut: rd_NO_DM: removing DM RAID activation
pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:02:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xe040 ctl 0xe030 bmdma 0xe000 irq 18
ata2: PATA max UDMA/100 cmd 0xe020 ctl 0xe010 bmdma 0xe008 irq 18

Similar Linux Hardware

scroll left scroll right

 Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 

Email address will not be published.

Rate Linux compatibility


Use the following HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Allowed file types: txt, jpg, png, gif, maximum file size: 2MB.