Adaptec RAID 1430SA PCI-E
Review of Linux Compatibility
The Sata controller card “RAID 1430SA PCI-E” from Adaptec provides four SATA ports (2 internal, 2 external) and supports RAID-Level 0, 1, 10 and JBOD.
The card is limited to the so called Hostraid a.k.a. Fakeraid, which is not supported during the installation phase by most of the Linux distributions. If not supported there is a riks that the data on the raid partition will be destroyed during the installation phase, because e.g. if using Raid 1 both Raid partitions will become out of sync.
In general, it is not recommended to use Fakeraid hardware with Linux. Instead, the better supported software Raid of the Linux Kernel should be used.
If the PC is equipped with the Adaptec RAID 1420SA nonetheless, a Linux driver is provided by Adaptec at http://www.adaptec.com/de-de/support/raid/sataii/aar-1430sa/ precompiled for SUSE, RedHat, or in source code.
creation date: 06/10/2012, last update: 14/12/2012 , Linux-Hardware-Guide
Similar Linux Hardware
Logitech K350 (USB, 2.4Ghz, Wireless, Keyboard)
Plugable USB-BT4LE (USB, Bluetooth 4.0)
Lenovo 06P4069 (USB Optical Mouse)
GreenAsia UH-174 (Hub, 4 Port, USB 1.1)
Logitech Media Keyboard K200 (USB, Keyboard, Wired)
A4Tech XL-750BK (Gaming Mouse, Laser, USB)
Logitech Internet 350 (Keyboard, USB)
Dell KB216 (USB, Keyboard, Wired)
Dell RT7D50 (Keyboard, USB)
Logitech G402 Hyperion Fury (Gaming Mouse, USB)
Logitech MX900 (Mouse, Wireless, Bluetooth, USB)
Perixx MX-2000II (Programmable, Gaming Laser Mouse, 8 Buttons)
Sony Playstation 2 Dualshock Controller (Gamepad, USB)
Toshiba Dynadock Docking Station PA3927E-1RPR (HDMI, USB 3.0)
Rock Candy PS3 Controller (Game Pad, USB, Controller)
Please use the comment section to submit corrections to the article as well as relevant excerpts of
Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.